Important notice - Our website is under going construction, therefore you may notice some issues. Please bare with us and contact or customer support team if you need any product information - 0116 284 9900
Important notice - Our website is under going construction, therefore you may notice some issues. Please bare with us and contact or customer support team if you need any product information - 0116 284 9900
LUMEL
What is a CT?
A current transformer (CT) is a transformer that is used to produce an alternating current (AC) in its secondary winding which is proportional to the AC current in its primary winding. Current transformers, together with voltage transformers (VTs) or potential transformers (PTs), which are designed for measurement, are known as instrument transformers.
When a current is too high to measure directly or the voltage of the circuit is too high, a current transformer can be used to provide an isolated lower current in its secondary which is proportional to the current in the primary circuit. The induced secondary current is then suitable for measuring instruments or processing in electronic equipment. Current transformers also have little effect on the primary circuit. Often, in electronic equipment, the isolation between the primary and secondary circuit is the important characteristic.
Lumel LCTM Series;
The transformers can be mounted to the base by wall mounting clamps with holes. The clamps of the secondary circuit are covered by the protective, moving flaps. The current transformers are available with a secondary current of 5 A or 1 A.
The transformer housings are made of special flame retardant material with high mechanical strength.
What is a CT?
A current transformer (CT) is a transformer that is used to produce an alternating current (AC) in its secondary winding which is proportional to the AC current in its primary winding. Current transformers, together with voltage transformers (VTs) or potential transformers (PTs), which are designed for measurement, are known as instrument transformers.
When a current is too high to measure directly or the voltage of the circuit is too high, a current transformer can be used to provide an isolated lower current in its secondary which is proportional to the current in the primary circuit. The induced secondary current is then suitable for measuring instruments or processing in electronic equipment. Current transformers also have little effect on the primary circuit. Often, in electronic equipment, the isolation between the primary and secondary circuit is the important characteristic.
Lumel LCTM Series;
The transformers can be mounted to the base by wall mounting clamps with holes. The clamps of the secondary circuit are covered by the protective, moving flaps. The current transformers are available with a secondary current of 5 A or 1 A.
The transformer housings are made of special flame retardant material with high mechanical strength.
Engineers and technicians are seeking solutions that streamline assembly whilst maintaining high levels of protection and flexibility. KDS-SR90 angled screw frames and inlays bring a new level of efficiency to cable routing with a unique 90° entry design.
The smallest logic controller by Crouzet is now 20% off for a limited time only! A powerhouse packed into just 17.5mm! Efficiency, adaptability, and seamless integration with free software.
Do you require signalling devices and beacons in your production process? Download our latest whitepaper!
Here, our customer requires control boxes for electricity metering systems. We leveraged our expertise to deliver easy-to-install, ready-to-use assemblies. We look forward to creating more of these bespoke control boxes for our customer.
This blog talks all things DC circuit protection including the key components: electronic circuit breakers, fuses and current monitoring devices. As well as how to choose the right protection.
Did you get a chance to visit IATECH at The Leicester Marriott Hotel? We had over 33 exhibitors and 8 fantastic Tech Talks throughout the day, Read all about the day, here.
|
|
|
|
|
|
||
|---|---|---|---|---|---|---|
|
|
|
|
|
|
||
|
|
|
|
|
|
||
|
|
|
|
|
|
||
|
|
|
|
|
|
||
|
|
|
|
|
|
||
|
|
|
|
|
|
| Parts | Price | ||
|---|---|---|---|
WOUND CT 20/5A - 0.5 Class
Art:
LCTM62-20/5-0.5
Copied
|
| ||
|
WOUND CT 50/1A - 0.5 Class
Art:
LCTM74-50/1-0.5
Copied
|
|
Select a variant in the list
