STEGO
Touch Safe Heater with built in thermostat 50-150W - CSF 060
CSF
This series of powerful and compact heaters has several benefits, both during installation and in operation. The heaters are available in the following outputs: 50, 100 and 150 W.
Â
They are easily installed thanks to the mounting clips for DIN rails that are fitted on the back of the heaters.
Â
This model is supplied with a plug in tamper-proof preset thermostat, so does not require any additional components or wiring, only two cables for power need to be connected and the heater is ready for use.
Â
Because the heater is dual isolated with a plastic casing, the side surfaces' temperature never exceeds 80 °C. The heater can thus be mounted relatively close to other components in the same installation, and there is no risk for fire damage.
Â
The dual isolation also means that the heater does not need to be earthed. The heat source consist of a PTC element, which provides a long and reliable lifetime even if the heater is in constant operation. This type of heater is also available without a thermostat. For this model, see CS060.Â
Â
- Dual isolated (does not require earthing)
- Thermostat attached with specified values
- Low element surface temperature
- DIN rail clip
Selected variant
Technical data
General Data |
|
|---|---|
| Heat output | 50 W |
| Nominal voltage | 120-240 V AC/DC |
| Heater body | Plastic |
| Mounting | DIN-rail 35mm |
| Colour | Black |
| Connection type | 4-pole terminal AWG 14 max |
| Heat source | Self-regulating PTC-element |
| Starting current max | 2,5 A |
| Recommended fuse (slow blow) | 4 A |
Dimensions |
|
| Height | 110 mm |
| Width | 60 mm |
| Depth | 90 mm |
| Weight | 0,3 kg |
Safety & Approvals |
|
| Protection class | II (double insulated) |
| IP class | IP20 |
*Invisible Heading* |
|
|---|---|
| Approvals | CE, EAC, Gost R, RoHS, UL E150057, VDE |
Thermostat |
|
| Switch off temperature | 15 °C |
| Switch on temperature | 5 °C |
| Switch off temperature | 59 °F |
| Switch on temperature | 41 °F |
Rated Operating Conditions |
|
| Temperature 50 mm above the heater | +86 °C (+186,8 °F) |
| Operational temperature | -45°C ... +70°C |
| Storage temperature | -45°C ... +70°C |
| Operating humidity | < 90% RH |
| Humidity storage | <90% RH |
| Voltage max | 265 V ac |
| Voltage min | 110 V ac |
| Housing | Plastic enclosure, UL94 V-0 |
Product description
This series of powerful and compact heaters has several benefits, both during installation and in operation. The heaters are available in the following outputs: 50, 100 and 150 W.
Â
They are easily installed thanks to the mounting clips for DIN rails that are fitted on the back of the heaters.
Â
This model is supplied with a plug in tamper-proof preset thermostat, so does not require any additional components or wiring, only two cables for power need to be connected and the heater is ready for use.
Â
Because the heater is dual isolated with a plastic casing, the side surfaces' temperature never exceeds 80 °C. The heater can thus be mounted relatively close to other components in the same installation, and there is no risk for fire damage.
Â
The dual isolation also means that the heater does not need to be earthed. The heat source consist of a PTC element, which provides a long and reliable lifetime even if the heater is in constant operation. This type of heater is also available without a thermostat. For this model, see CS060.Â
Â
Related
Book your Cable Preparation Machinery Demo at OEM
To help experience the capabilities of Z+F machines first-hand, we provide an in-depth demonstration and workshop. These sessions will show the machines in action and allow you to understand their features and gain valuable insight into their operation and benefits.
OEM introduces IATECH - The Industrial Automation Technology Expo
We are thrilled to announce the launch of IATECH, THe Industrial Automation Technology expo at Leicester Marriott Hotel on 23rd October. The ultimate platform for showcasing our extensive product range and broad business areas, featuring over 50 leading suppliers under one roof!
Automation Components for Specialist Vehicles
The specialist vehicle industry can include automotive and EV, heavy vehicles such as agriculture and rail, and marine. This email takes you through some of the various products we offer for specialist vehicle applications.
Modern Power Distribution
This blog post delves into the key components, current trends, and best practices in power distribution, illustrating the significant impact these systems have on our daily operations and long-term energy strategies.
Lightning and surge protection to safeguard equipment
We shine a spotlight on surge protection devices (SPDs), a crucial yet often overlooked component in industrial settings. Every surge of electricity, every fluctuation in voltage, poses a potential threat to your machinery and systems.
Efficient crimping, punching and stripping
Renowned for high-quality cable cutting and crimping tools, Klauke serves electrical contractors, cable jointers, and linemen across a spectrum of sectors
