STEGO
Heating element 15-150W - HG 140
HG
The heat source in the element consists of a PTC element – a semi-conductor that adapts its output to the ambient temperature.
The PTC element has a high starting current and provides full output almost immediately. The current then falls quickly and the element is thereafter self-regulating, meaning that the warmer the surroundings, the less output produced by the element.
Â
 Thanks to the chimney effect, meaning that the cold air is drawn into the element's bottom and blows out at the top, good self-circulation is achieved for the heated air.
Â
The addition of Pressure Clamp terminals saves time and simplifies the installation.
- Dynamic heating (PTC element)
- Compact
- Energy saving
- Quick connector and quick installation
Selected variant
Technical data
General Data |
|
|---|---|
| Heat output | 150 W |
| Nominal voltage | 120-240 V AC/DC |
| Heater body | Anodized aluminum |
| Mounting | DIN-rail |
| Connection type | 3 pressure clamps for stranded wire 0.5-1.5mm² and rigid wire 0.5- 2.5mm² |
| Heat source | Self-regulating PTC-element |
| Starting current max | 9 A |
| Recommended fuse (slow blow) | 10 A |
Dimensions |
|
| Height | 259 mm |
| Width | 70 mm |
| Depth | 60 mm |
| Weight | 0,7 kg |
Safety & Approvals |
|
|---|---|
| Protection class | I (earthed) |
| IP class | IP20 |
| Approvals | CE, EAC, Gost R, RoHS, UL E150057, VDE |
Rated Operating Conditions |
|
| Operational temperature | -45°C ... +70°C |
| Storage temperature | -45°C ... +70°C |
| Operating humidity | < 90% RH |
| Humidity storage | <90% RH |
| Voltage max | 265 V ac/dc |
| Voltage min | 110 V ac/dc |
| Housing | Anodized aluminium |
Product description
The heat source in the element consists of a PTC element – a semi-conductor that adapts its output to the ambient temperature.
The PTC element has a high starting current and provides full output almost immediately. The current then falls quickly and the element is thereafter self-regulating, meaning that the warmer the surroundings, the less output produced by the element.
Â
 Thanks to the chimney effect, meaning that the cold air is drawn into the element's bottom and blows out at the top, good self-circulation is achieved for the heated air.
Â
The addition of Pressure Clamp terminals saves time and simplifies the installation.
