STEGO
Fan Heater 250-400 W HGL046
The heat source in this heating fan is a resistor element with an integrated safety cut-out.
Â
Thanks to the fan, good air circulation is obtained, while at the same time high heating output can be achieved. The heating fan is therefore a good choice for installation in, for example, enclosures and outdoor cabinets (base stations, ticket vending machines, etc.) for avoiding condensation or maintaining the temperature above a specified level.
Â
To protect against overheating due to fan failure an automatic internal resetable cut out is included as standard.
Â
Â
- Compact
- High heating output
- Long lifetime
- Maintenance-free
Selected variant
Technical data
General Data |
|
|---|---|
| Heat output | 250 W |
| Nominal voltage | 230 V AC |
| Frequency | 50/60 Hz |
| Heater body | Anodized aluminum, Plastic |
| Material of body | Eloxed aluminum |
| Mounting | Clip on, DIN rail |
| Connection type | 3-pole screw terminal for 1.5 mm² RK cable |
| Heat source | Resistor element, integrated over heat protection |
| Recommended fuse (slow blow) | 2 A |
| Life span | 50 000 h @ +25 °C |
| Air capacity | 45 m³/h |
Dimensions |
|
| Height | 182 mm |
| Weight | 1,1 kg |
| Tightening torque for cable | 0,8 Nm |
Safety & Approvals |
|
| Protection class | I (earthed) |
*Invisible Heading* |
|
|---|---|
| IP class | IP20 |
| Approvals | CE, cULus, EAC, RoHS, UL, UL E150057, UL 508, VDE |
| Flammability class | UL94-V0 |
| Overheating protection | Integrated overheating protection with auto-reset |
Rated Operating Conditions |
|
| Operational temperature | -45°C ... +70°C |
| Storage temperature | -45°C ... +70°C |
| Operating humidity | < 90% RH |
| Humidity storage | <90% RH |
| Fan | Axial fan, ball bearing |
| Plastic cover | Black, UL94 V-0 |
| Voltage max | 230 V ac |
| Voltage min | 230 V ac |
| Housing | Anonized aluminium |
Product description
The heat source in this heating fan is a resistor element with an integrated safety cut-out.
Â
Thanks to the fan, good air circulation is obtained, while at the same time high heating output can be achieved. The heating fan is therefore a good choice for installation in, for example, enclosures and outdoor cabinets (base stations, ticket vending machines, etc.) for avoiding condensation or maintaining the temperature above a specified level.
Â
To protect against overheating due to fan failure an automatic internal resetable cut out is included as standard.
Â
Â
