STEGO
Thermostat 20-56V DC - DCT 010
DCT
The electronic thermostat with integrated switch module is used to control DC powered devices with high capacities in control and switch cabinets.
Heaters, coolers, filter fans or signal devices can directly be controlled via an internal electronic circuit.
The external sensor can be positioned freely anywhere in the control cabinet for precise temperature measurements.
Additionally, this thermostat is available in versions that not only measure temperature via the external sensor, but also the relative humidity (RH).
- For high DC loads
- Small hysteresis
- Optical indication (LED)
- Also available with moisture detection
Selected variant
Technical data
General data |
|
|---|---|
| Control range temperature from | -10 °C |
| Control range temperature to | 50 °C |
| Hysteresis temperature | 3 K (±1 K) @ 25 °C (77 °F), @ 50% RH |
| Contact type | 1 x N/O |
| Colour | Light grey |
| Activation | Temperature |
Rated operating conditions |
|
| Voltage max | 56 V dc |
| Voltage min | 20 V dc |
| Breaking capacity | DC 13 A |
| Operational temperature | -30°C ... +50°C |
| Storage temperature | -30°C ... +80°C |
| Life span | 100,000 cycles |
*Invisible Heading* |
|
|---|---|
| Operating humidity | < 90% RH |
| Humidity storage | <90 % RH |
Dimensions |
|
| Height | 93 mm |
| Width | 53 mm |
| Depth | 44 mm |
| Weight | 0,12 kg |
| Material plastic housing | Plastic |
| Cable length | 2000 mm |
Safety & approvals |
|
| IP class | IP20 |
| Approvals | CE, EAC, RoHS, UL, VDE |
| Flammability class | UL94-V0 |
Product description
The electronic thermostat with integrated switch module is used to control DC powered devices with high capacities in control and switch cabinets.
Heaters, coolers, filter fans or signal devices can directly be controlled via an internal electronic circuit.
The external sensor can be positioned freely anywhere in the control cabinet for precise temperature measurements.
Additionally, this thermostat is available in versions that not only measure temperature via the external sensor, but also the relative humidity (RH).
