CONTA-CLIP
Plug In Din Rail - PK-TS
The pluggable PK-TS connection system was designed to meet the increasing demands for a quick modular way of connecting and disconnecting parts of electrical systems together.
For example; - if you have components, such as HMI’s on a front panel, lid or door of an enclosure the PK-TS can be used to quickly disconnect from the main controls inside the panel.
The wiring which connects the two parts is fed out of one panel with the PK-TS base element. The corresponding cables are placed on their counterpart in the second panel. The PK-TS base element is attached to the DIN rail using mounting feet which are fitted either with a TS15/35 or TS32/35 combi-foot for mounting on DIN rail. There are various options for the type of wire connection for the plug-in part (push-in, clamping yoke or eccentric). The PK-TS elements are available with 2 to 24 poles and with a screw flange. The PK-TS base elements with a screw flange use this flange to connect to the pluggable wire-connection component. This protects them from accidental loosening. Wires can be connected from different directions, depending on the selection of the PK-TS combination and counterpart. To avoid incorrect mating when using several PK-TS in one panel, both the PK-TS and its counterpart can be coded without loss of poles by using our proven CONTA-CON coding system.
Â
- TS15/25 or TS32/35 versions
- 2 pole to 24 pole
- Screw flange options
- Coding pins
- Polyamide 6.6-V-0
Selected variant
Technical data
General data |
|
|---|---|
| Colour | Green |
| Rated cross section | 2,5 mm² |
| Rated current | 10 A |
| Rated voltage | 250 V |
| Rated impulse voltage | 4 kV |
| Overvoltage category | III |
| Contamination degree | 3 |
| Approvals | UL, cUL, VDE |
Dimensions |
|
| Length | 42,5 mm |
| Width | 11,68 mm |
| Height TS 35/7.5 | 35,5 mm |
| Height TS 32 | 40,5 mm |
| Pitch | 5,08 mm |
Connection data |
|
| Cross section single wire from | 0,2 mm² |
| Cross section single wire to | 4 mm² |
| Cross section stranded wire from | 0,2 mm² |
| Cross section stranded wire to | 2,5 mm² |
| Cross section stranded with ferrule from | 0,25 mm² |
| Cross section stranded with ferrule to | 2,5 mm² |
| Rated wire cross section from (AWG) | 28 |
| Rated wire cross section to (AWG) | 12 |
| Stripping length | 6 mm |
| Screw size | M 3 |
Materials |
|
| Flammability class | UL94-V0 |
| Operating temperature from | -30 °C |
| Operating temperature to | 105 °C |
Approvals |
|
| Rated voltage UL | 300 V |
| Rated current UL | 15 A |
| UL test standard | UL 1059 |
| Rated voltage cUL | 300 V |
| Rated current cUL | 15 A |
*Invisible Heading* |
|
|---|---|
| cUL test standard | C22.2 No 158 |
Additional data |
|
| Tariff code | 85366930 |
| Country of origin | TN |
| Weight | 9,59 g |
| Pack size | 50 |
| Glow wire ignition temperature (GWIT) | GWIT 775 |
| Insulation resistance | 1*10^13 Ω x cm |
| Clamp material | Brass |
| Contact flag | Copper alloy |
| Rated voltage VDE | 250 V |
| Length of pin header | 20,6 mm |
| Connector version | Fixed |
| Angle of wire connection/contact | 90° (vertically upwards) |
| Screw material | Steel |
| Width right | 3,3 mm |
| Glow wire flammability index (GWFI) | GWFI 850 |
| Rated current VDE | 10 A |
| Number of poles | 2 |
| GWFI after-glow time | 30 s |
| Width left | 3,3 mm |
| Housing material | Polyamide 6.6 |
| VDE test standard | DIN EN 61984 |
| Connector type/principle | Screw |
| Plug-in cycles acc. to standard | 100 |
| Type | Plug-in connection system |
| GWIT exposure time | 5 s |
| Torque | 0,5 Nm |
| Current creepage resistance | CTI 600 |
| Connection cycles acc. to standard | 5 |
Technical illustrations
PK-TS Wire Entry - Horizontal Right
PKB950 Wire Entry - Vertical Above, Screw Connection - Horizontal
PK-TS Wire Entry - Horizontal Right
PKB1100 Wire Entry - Horizontal Left
PK-TS Wire Entry - Horizontal Right
PKB1110 Wire Entry - Horizontal Right
PK-TS Wire Entry - Horizontal Right
PKBT1200 Wire Entry - Vertical Above, Screw Connection- Vertical
Product description
The pluggable PK-TS connection system was designed to meet the increasing demands for a quick modular way of connecting and disconnecting parts of electrical systems together.
For example; - if you have components, such as HMI’s on a front panel, lid or door of an enclosure the PK-TS can be used to quickly disconnect from the main controls inside the panel.
The wiring which connects the two parts is fed out of one panel with the PK-TS base element. The corresponding cables are placed on their counterpart in the second panel. The PK-TS base element is attached to the DIN rail using mounting feet which are fitted either with a TS15/35 or TS32/35 combi-foot for mounting on DIN rail. There are various options for the type of wire connection for the plug-in part (push-in, clamping yoke or eccentric). The PK-TS elements are available with 2 to 24 poles and with a screw flange. The PK-TS base elements with a screw flange use this flange to connect to the pluggable wire-connection component. This protects them from accidental loosening. Wires can be connected from different directions, depending on the selection of the PK-TS combination and counterpart. To avoid incorrect mating when using several PK-TS in one panel, both the PK-TS and its counterpart can be coded without loss of poles by using our proven CONTA-CON coding system.
Â
Related
Automation Components for Specialist Vehicles
The specialist vehicle industry can include automotive and EV, heavy vehicles such as agriculture and rail, and marine. This email takes you through some of the various products we offer for specialist vehicle applications.
Modern Power Distribution
This blog post delves into the key components, current trends, and best practices in power distribution, illustrating the significant impact these systems have on our daily operations and long-term energy strategies.
Lightning and surge protection to safeguard equipment
We shine a spotlight on surge protection devices (SPDs), a crucial yet often overlooked component in industrial settings. Every surge of electricity, every fluctuation in voltage, poses a potential threat to your machinery and systems.
Efficient crimping, punching and stripping
Renowned for high-quality cable cutting and crimping tools, Klauke serves electrical contractors, cable jointers, and linemen across a spectrum of sectors
Case Study - Electro Pneumatic Control Box
At OEM Automatic, we can supply a series of components for your one project. All under one roof. This case study discusses how we supplied several components for our customer's new electro-pneumatic control box.Â
Cable Protection For Emobility
To promote constant and reliable performance, as well as a longer life of parts in the vehicle, it is important to consider the right cable protector.
