Important notice - Our website is under going construction, therefore you may notice some issues. Please bare with us and contact or customer support team if you need any product information - 0116 284 9900
CONTA-CLIP
The SVB screw-type distributor block makes it possible to distribute potential and power in a compact space without any additional accessories. You can use the distributor block to establish an electromechanical connection between a wire with a large cross-section and one or more wires with small cross-sections. They can be used in installation and distribution board construction and also in controller construction for machinery.
Â
The SVB blocks are mounted by snapping them on to TS 35 DIN rails. They can also be attached directly to a mounting plate using the screw flange located on the side of the housing.
Â
General Data |
|
---|---|
Rated current copper | 80 A |
Rated impulse voltage | 2,5 kV |
Colour | Light grey |
Short-circuit current resistance IPK (peak value) | 2,7 kA |
Rated voltage V AC | 1000 V AC |
Mounting | TS 35 and direct mount |
Contamination degree | 3 |
Short-circuit current resistance ICW over 1s | 1,9 kA |
Rated voltage V DC | 1500 V DC |
Approvals | UL, cUL, EAC |
Overvoltage category | III |
Connection Data |
|
Output B: stripping length | 12 mm |
Output B: wire cross-section stranded, min. | 2,5 mm² |
Output A: diameter | 7 mm |
Input A: torque, min. | 1,5 Nm |
Input A: wire cross-section stranded, min. | 2,5 mm² |
Connections | 7 |
Number of outputs A | 2 |
Output A: wire cross-section rigid, min. | 2,5 mm² |
Output B: diameter | 4,5 mm |
Input A: wire cross-section with wire-end ferrules, max. | 16 mm² |
Input A: wire cross-section stranded, max. | 16 mm² |
Output A: screw thread | M 5 |
Input A: wire cross-section rigid, min. | 2,5 mm² |
Output A: wire cross-section rigid, max. | 16 mm² |
Input A: screw head | Slotted / Phillips |
Input A: diameter | 7 mm |
Output A: torque, min. | 1,5 Nm |
Output B: wire cross-section stranded with wire-end ferrules, max. | 6 mm² |
Output B: screw threading | M 4 |
Output A: wire cross-section stranded with wire-end ferrules, max. | 16 mm² |
Output B: wire cross-section stranded, max. | 6 mm² |
Input A: stripping length | 12 mm |
Input A: torque, max. | 3 Nm |
Output B: wire cross-section stranded with wire-end ferrules, min. | 2,5 mm² |
Output A: stripping length | 12 mm |
Input A: screw thread | M 5 |
Input A: wire cross-section with wire-end ferrules, min. | 2,5 mm² |
Output B: torque, max. | 1,5 Nm |
*Invisible Heading* |
|
---|---|
Output A: torque, max. | 3 Nm |
Output B: rated cross-section | 6 mm² |
Output B: torque, min. | 0,8 Nm |
Output B: wire cross-section rigid, max. | 6 mm² |
Input A: rated cross-section | 16 mm² |
Number of outputs B | 4 |
Output A: wire cross-section stranded, max. | 16 mm² |
Output A: screw head | Slotted / Phillips |
Output A: rated cross-section | 16 mm² |
Output B: screw head | Slotted / Phillips |
Input A: wire cross-section rigid, max. | 16 mm² |
Output A: wire cross-section stranded, min. | 2,5 mm² |
Output B: wire cross-section rigid, min. | 2,5 mm² |
Number of inputs A | 1 |
Output A: wire cross-section stranded with wire-end ferrules, min. | 2,5 mm² |
Dimensions |
|
Height TS 35/7.5 | 50 mm |
Length | 66 mm |
Width | 27 mm |
Height | 47 mm |
Materials |
|
Flammability class | UL94-V0 |
Operating temperature from | -40 °C |
Operating temperature to | 120 °C |
Insulation material | Polyamide 6.6 |
Approvals |
|
UL test standard | UL 1059 |
UL SCCR rating | 100 kA |
Rated current UL | 80 A |
Rated current cUL | 80 A |
Rated voltage UL | 600 V |
UL overvoltage protection - req. Series fuse class J | 80 A |
Rated voltage cUL | 600 V |
SCCR rating | 100 kV |
Req. series fuse class J | 80 A |
cUL test standard | C22.2 No 158 |
EAC test standard | TR ZU 004/2011 |
Additional Data |
|
Pack size | 1 Â |
Country of origin | FR |
Tariff code | 85369010 |
Weight | 61,4 g |
The SVB screw-type distributor block makes it possible to distribute potential and power in a compact space without any additional accessories. You can use the distributor block to establish an electromechanical connection between a wire with a large cross-section and one or more wires with small cross-sections. They can be used in installation and distribution board construction and also in controller construction for machinery.
Â
The SVB blocks are mounted by snapping them on to TS 35 DIN rails. They can also be attached directly to a mounting plate using the screw flange located on the side of the housing.
Â
Engineers and technicians are seeking solutions that streamline assembly whilst maintaining high levels of protection and flexibility. KDS-SR90 angled screw frames and inlays bring a new level of efficiency to cable routing with a unique 90° entry design.
The smallest logic controller by Crouzet is now 20% off for a limited time only! A powerhouse packed into just 17.5mm! Efficiency, adaptability, and seamless integration with free software.
Do you require signalling devices and beacons in your production process? Download our latest whitepaper!
Here, our customer requires control boxes for electricity metering systems. We leveraged our expertise to deliver easy-to-install, ready-to-use assemblies. We look forward to creating more of these bespoke control boxes for our customer.
This blog talks all things DC circuit protection including the key components: electronic circuit breakers, fuses and current monitoring devices. As well as how to choose the right protection.
Did you get a chance to visit IATECH at The Leicester Marriott Hotel? We had over 33 exhibitors and 8 fantastic Tech Talks throughout the day, Read all about the day, here.
|
|
|
|
|
||
---|---|---|---|---|---|---|
|
|
|
|
|
||
|
|
|
|
|
||
|
|
|
|
|
||
|
|
|
|
|
||
|
|
|
|
|
||
|
|
|
|
|
Parts | Rated current copper | Colour | Short-circuit current resistance IPK (peak value) | Rated voltage V AC | Short-circuit current resistance ICW over 1s | Rated voltage V DC | Approvals | Additional information | Output B: stripping length | Output B: wire cross-section stranded, min. | Output C: wire cross-section rigid, max. | Output C: torque, max. | Input B: torque, max. | Input B: wire cross-section rigid, max. | Output A: diameter | Output C: stripping length | Input A: torque, min. | Input C: screw head | Input C: diameter | Input A: wire cross-section stranded, min. | Connections | Number of outputs A | Output A: wire cross-section rigid, min. | Output B: diameter | Input A: wire cross-section with wire-end ferrules, max. | Input A: wire cross-section stranded, max. | Output A: screw thread | Input B: diameter | Input A: wire cross-section rigid, min. | Output A: wire cross-section rigid, max. | Special connections | Input C: wire cross-section, stranded with wire-end ferrules, min. | Input B: wire cross-section, stranded with wire-end ferrules, min. | Output C: wire cross-section rigid, min. | Output C: diameter | Input A: screw head | Input C: torque, min. | Number of inputs C | Output C: wire cross-section stranded with wire-end ferrules, min. | Input A: diameter | Output A: torque, min. | Output B: wire cross-section stranded with wire-end ferrules, max. | Input B: screw head | Output B: screw threading | Output A: wire cross-section stranded with wire-end ferrules, max. | Input B: screw thread | Output B: wire cross-section stranded, max. | Input A: stripping length | Input B: wire cross-section rigid, min. | Output C: rated cross-section | Input A: torque, max. | Output B: wire cross-section stranded with wire-end ferrules, min. | Output A: stripping length | Input C: stripping length | Output C: screw thread | Input A: screw thread | Input C: wire cross-section stranded, min. | Input B: rated cross-section | Input C: wire cross-section rigid, min. | Input A: wire cross-section with wire-end ferrules, min. | Output B: torque, max. | Output C: screw head | Output C: wire cross-section stranded, max. | Output C: wire cross-section stranded with wire-end ferrules, max. | Output A: torque, max. | Output B: rated cross-section | Input C: torque, max. | Output B: torque, min. | Output B: wire cross-section rigid, max. | Input B: torque, min. | Input A: rated cross-section | Input B: wire cross-section stranded with wire-end ferrules, max. | Output C: wire cross-section stranded, min. | Number of outputs B | Input B: wire cross-section stranded, max. | Output A: wire cross-section stranded, max. | Number of outputs C | Output A: screw head | Input B: stripping length | Output A: rated cross-section | Input C: wire cross-section stranded, max. | Input C: wire cross-section rigid, max. | Output B: screw head | Input B: wire cross-section stranded, min. | Input A: wire cross-section rigid, max. | Output A: wire cross-section stranded, min. | Output B: wire cross-section rigid, min. | Input C: rated cross-section | Input C: wire cross-section, stranded with wire-end ferrules, max. | Number of inputs A | Input C: screw threading | Output A: wire cross-section stranded with wire-end ferrules, min. | Number of inputs B | Output C: torque, min. | Height TS 35/7.5 | Length | Width | Height | UL test standard | UL SCCR rating | Rated current UL | Rated current cUL | Rated voltage UL | UL overvoltage protection - req. Series fuse class J | Rated voltage cUL | SCCR rating | Req. series fuse class J | cUL test standard | EAC test standard | Country of origin | Weight | Price | ||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
![]()
SVB80 DIST TERMINAL 80A
Art:
1740.0
Copied
|
80 A
|
Light grey
|
2,7 kA
|
1000 V AC
|
1,9 kA
|
1500 V DC
|
UL, cUL, EAC
|
|
12 mm
|
2,5 mm²
|
|
|
|
|
7 mm
|
|
1,5 Nm
|
|
|
2,5 mm²
|
7
|
2
|
2,5 mm²
|
4,5 mm
|
16 mm²
|
16 mm²
|
M 5
|
|
2,5 mm²
|
16 mm²
|
|
|
|
|
|
Slotted / Phillips
|
|
|
|
7 mm
|
1,5 Nm
|
6 mm²
|
|
M 4
|
16 mm²
|
|
6 mm²
|
12 mm
|
|
|
3 Nm
|
2,5 mm²
|
12 mm
|
|
|
M 5
|
|
|
|
2,5 mm²
|
1,5 Nm
|
|
|
|
3 Nm
|
6 mm²
|
|
0,8 Nm
|
6 mm²
|
|
16 mm²
|
|
|
4
|
|
16 mm²
|
|
Slotted / Phillips
|
|
16 mm²
|
|
|
Slotted / Phillips
|
|
16 mm²
|
2,5 mm²
|
2,5 mm²
|
|
|
1
|
|
2,5 mm²
|
|
|
50 mm
|
66 mm
|
27 mm
|
47 mm
|
UL 1059
|
100 kA
|
80 A
|
80 A
|
600 V
|
80 A
|
600 V
|
100 kV
|
80 A
|
C22.2 No 158
|
TR ZU 004/2011
|
FR
|
61,4 g
|
| ||
![]()
SVB 80, Blue Distribution block 80A
Art:
1740.5
Copied
|
80 A
|
Blue
|
2,7 kA
|
1000 V AC
|
1,9 kA
|
1000 V DC
|
UL, cUL, EAC
|
lid printed blue
|
12 mm
|
2,5 mm²
|
|
|
|
|
7 mm
|
|
1,5 Nm
|
|
|
2,5 mm²
|
7
|
2
|
2,5 mm²
|
4,5 mm
|
16 mm²
|
16 mm²
|
M 5
|
|
2,5 mm²
|
16 mm²
|
|
|
|
|
|
Slotted / Phillips
|
|
|
|
7 mm
|
1,5 Nm
|
6 mm²
|
|
M 4
|
16 mm²
|
|
6 mm²
|
12 mm
|
|
|
3 Nm
|
2,5 mm²
|
12 mm
|
|
|
M 5
|
|
|
|
2,5 mm²
|
1,5 Nm
|
|
|
|
3 Nm
|
6 mm²
|
|
0,8 Nm
|
6 mm²
|
|
16 mm²
|
|
|
4
|
|
16 mm²
|
|
Slotted / Phillips
|
|
16 mm²
|
|
|
Slotted / Phillips
|
|
16 mm²
|
2,5 mm²
|
2,5 mm²
|
|
|
1
|
|
2,5 mm²
|
|
|
50 mm
|
66 mm
|
27 mm
|
47 mm
|
UL 1059
|
100 kA
|
80 A
|
80 A
|
600 V
|
80 A
|
600 V
|
100 kV
|
80 A
|
C22.2 No 158
|
TR ZU 004/2011
|
FR
|
61,4 g
|
| ||
![]()
SVB 125, Distribution block 125A
Art:
1741.0
Copied
|
125 A
|
Light grey
|
30 kA
|
1000 V AC
|
4,2 kA
|
1500 V DC
|
UL, cUL, EAC
|
|
|
|
|
|
5 Nm
|
16 mm²
|
6,5 mm
|
|
3,5 Nm
|
|
|
10 mm²
|
8
|
6
|
2,5 mm²
|
|
35 mm²
|
35 mm²
|
M 5
|
7 mm
|
10 mm²
|
16 mm²
|
|
|
2,5 mm²
|
|
|
Allen key
|
|
|
|
10 mm
|
2 Nm
|
|
Allen key
|
|
16 mm²
|
M 6
|
|
16 mm
|
2,5 mm²
|
|
5 Nm
|
|
12 mm
|
|
|
M 8
|
|
16 mm²
|
|
10 mm²
|
|
|
|
|
3 Nm
|
|
|
|
|
3,5 Nm
|
35 mm²
|
16 mm²
|
|
|
16 mm²
|
16 mm²
|
|
Slotted / Phillips
|
15 mm
|
16 mm²
|
|
|
|
2,5 mm²
|
35 mm²
|
2,5 mm²
|
|
|
|
1
|
|
2,5 mm²
|
1
|
|
50 mm
|
75 mm
|
27 mm
|
47 mm
|
UL 1059
|
100 kA
|
115 A
|
115 A
|
600 V
|
125 A
|
600 V
|
100 kV
|
125 A
|
C22.2 No 158
|
TR ZU 004/2011
|
FR
|
136,6 g
|
| ||
![]()
SVB 175, Distribution block 175A
Art:
1742.0
Copied
|
175 A
|
Light grey
|
30 kA
|
1000 V AC
|
11 kA
|
1500 V DC
|
UL, cUL, EAC
|
|
|
|
|
|
|
|
6,5 mm
|
|
6 Nm
|
|
|
16 mm²
|
11
|
10
|
2,5 mm²
|
|
70 mm²
|
70 mm²
|
M 6
|
|
16 mm²
|
16 mm²
|
|
|
|
|
|
Allen key
|
|
|
|
12 mm
|
3 Nm
|
|
|
|
16 mm²
|
|
|
16 mm
|
|
|
10 Nm
|
|
12 mm
|
|
|
M 10
|
|
|
|
16 mm²
|
|
|
|
|
4 Nm
|
|
|
|
|
|
70 mm²
|
|
|
|
|
16 mm²
|
|
Allen key
|
|
16 mm²
|
|
|
|
|
70 mm²
|
2,5 mm²
|
|
|
|
1
|
|
2,5 mm²
|
|
|
46 mm
|
71 mm
|
45 mm
|
43 mm
|
UL 1059
|
|
175 A
|
175 A
|
600 V
|
|
600 V
|
100 kV
|
125 A
|
C22.2 No 158
|
TR ZU 004/2011
|
FR
|
221 g
|
| ||
![]()
SVB 250, Distribution block 250A
Art:
1743.0
Copied
|
230 A
|
Light grey
|
51 kA
|
1000 V AC
|
24,5 kA
|
1500 V DC
|
UL, EAC
|
|
12 mm
|
1,5 mm²
|
10 mm²
|
3 Nm
|
|
|
9 mm
|
12 mm
|
19 Nm
|
|
|
35 mm²
|
12
|
2
|
6 mm²
|
6,5 mm
|
95 mm²
|
95 mm²
|
M 8
|
|
35 mm²
|
35 mm²
|
|
|
|
1,5 mm²
|
6 mm
|
Allen key
|
|
|
1,5 mm²
|
15 mm
|
3,5 Nm
|
16 mm²
|
|
M 6
|
25 mm²
|
|
16 mm²
|
29 mm
|
|
10 mm²
|
21 Nm
|
1,5 mm²
|
12 mm
|
|
M 6
|
M 14
|
|
|
|
35 mm²
|
3 Nm
|
Slotted
|
10 mm²
|
10 mm²
|
7 Nm
|
16 mm²
|
|
2 Nm
|
16 mm²
|
|
120 mm²
|
|
1,5 mm²
|
5
|
|
25 mm²
|
4
|
Slotted
|
|
35 mm²
|
|
|
Slotted
|
|
120 mm²
|
6 mm²
|
1,5 mm²
|
|
|
1
|
|
6 mm²
|
|
2 Nm
|
53 mm
|
96 mm
|
44 mm
|
50 mm
|
UL 1059
|
100 kA
|
230 A
|
|
600 V
|
250 A
|
|
100 kV
|
250 A
|
|
TR ZU 004/2011
|
FR
|
435,2 g
|
| ||
![]()
SVB 400, Distribution block 400A
Art:
1744.0
Copied
|
400 A
|
Light grey
|
51 kA
|
1000 V AC
|
21 kA
|
1500 V DC
|
UL, EAC
|
|
12 mm
|
1,5 mm²
|
10 mm²
|
3 Nm
|
|
|
9 mm
|
12 mm
|
25 Nm
|
|
|
95 mm²
|
12
|
2
|
6 mm²
|
6,5 mm
|
150 mm²
|
150 mm²
|
M 8
|
|
95 mm²
|
35 mm²
|
|
|
|
1,5 mm²
|
6 mm
|
Allen key
|
|
|
1,5 mm²
|
19 mm
|
3,5 Nm
|
16 mm²
|
|
M 6
|
25 mm²
|
|
16 mm²
|
29 mm
|
|
10 mm²
|
27 Nm
|
1,5 mm²
|
12 mm
|
|
M 6
|
M 16
|
|
|
|
95 mm²
|
3 Nm
|
Slotted
|
10 mm²
|
10 mm²
|
7 Nm
|
16 mm²
|
|
2 Nm
|
16 mm²
|
|
185 mm²
|
|
1,5 mm²
|
5
|
|
25 mm²
|
4
|
Slotted
|
|
35 mm²
|
|
|
Slotted
|
|
185 mm²
|
6 mm²
|
1,5 mm²
|
|
|
1
|
|
6 mm²
|
|
2 Nm
|
53 mm
|
96 mm
|
44 mm
|
50 mm
|
UL 1059
|
100 kA
|
310 A
|
|
600 V
|
350 A
|
|
100 kV
|
350 A
|
|
TR ZU 004/2011
|
FR
|
405 g
|
| ||
![]()
SVB 175/3, 3-Phase distribution block 250A
Art:
1745.0
Copied
|
160 A
|
Light grey
|
30 kA
|
1000 V AC
|
11 kA
|
1500 V DC
|
UL, cUL, EAC
|
|
|
|
|
|
|
|
6,5 mm
|
|
6 Nm
|
|
|
16 mm²
|
3 x 7
|
3 x 6
|
2,5 mm²
|
|
50 mm²
|
50 mm²
|
M 6
|
|
16 mm²
|
16 mm²
|
|
|
|
|
|
Allen key
|
|
|
|
12 mm
|
3 Nm
|
|
|
|
10 mm²
|
|
|
16 mm
|
|
|
10 Nm
|
|
12 mm
|
|
|
M 10
|
|
|
|
16 mm²
|
|
|
|
|
4 Nm
|
|
|
|
|
|
70 mm²
|
|
|
|
|
10 mm²
|
|
Allen key
|
|
16 mm²
|
|
|
|
|
70 mm²
|
2,5 mm²
|
|
|
|
3 x 1
|
|
2,5 mm²
|
|
|
46 mm
|
71 mm
|
80 mm
|
43 mm
|
UL 1059
|
|
175 A
|
175 A
|
600 V
|
|
600 V
|
100 kV
|
175 A
|
C22.2 No 158
|
TR ZU 004/2011
|
FR
|
389,4 g
|
| ||
![]()
SVB 160, Distribution block 160A
Art:
1746.0
Copied
|
175 A
|
Light grey
|
30 kA
|
1000 V AC
|
11 kA
|
1500 V DC
|
UL, cUL, EAC
|
|
|
|
|
|
|
|
7 mm
|
|
5 Nm
|
|
|
10 mm²
|
7
|
6
|
2,5 mm²
|
|
70 mm²
|
70 mm²
|
M 5
|
|
10 mm²
|
16 mm²
|
Busbar 16 x 5mm
|
|
|
|
|
Allen key
|
|
|
|
13 mm
|
1,5 Nm
|
|
|
|
16 mm²
|
|
|
18 mm
|
|
|
6 Nm
|
|
12 mm
|
|
|
M 10
|
|
|
|
10 mm²
|
|
|
|
|
3 Nm
|
|
|
|
|
|
70 mm²
|
|
|
|
|
16 mm²
|
|
Slotted / Phillips
|
|
16 mm²
|
|
|
|
|
70 mm²
|
2,5 mm²
|
|
|
|
1
|
|
2,5 mm²
|
|
|
54 mm
|
92 mm
|
35 mm
|
50 mm
|
UL 1059
|
|
160 A
|
160 A
|
600 V
|
|
600 V
|
100 kV
|
175 A
|
C22.2 No 158
|
TR ZU 004/2011
|
FR
|
243,8 g
|
| ||
![]()
SVB 125/4, 3-Phase distribution block 125A
Art:
1747.0
Copied
|
160 A
|
Light grey
|
30 kA
|
690 V AC
|
11,8 kA
|
690 V DC
|
|
|
12 mm
|
1,5 mm²
|
16 mm²
|
3 Nm
|
1,5 Nm
|
6 mm²
|
9 mm
|
18 mm
|
1,5 Nm
|
Slotted / Phillips
|
7 mm
|
6 mm²
|
3 x 8
|
1
|
6 mm²
|
5 mm
|
25 mm²
|
25 mm²
|
M 5
|
5 mm
|
6 mm²
|
35 mm²
|
Neutral conductor busbar
|
4 mm²
|
1,5 mm²
|
4 mm²
|
7 mm
|
Slotted / Phillips
|
1,5 Nm
|
3 x 2
|
4 mm²
|
9 mm
|
1,5 Nm
|
6 mm²
|
Slotted / Phillips
|
M 4
|
25 mm²
|
M 4
|
6 mm²
|
18 mm
|
1,5 mm²
|
16 mm²
|
3 Nm
|
1,5 mm²
|
18 mm
|
18 mm
|
M 5
|
M 5
|
4 mm²
|
6 mm²
|
4 mm²
|
6 mm²
|
1,5 Nm
|
Slotted / Phillips
|
10 mm²
|
10 mm²
|
3 Nm
|
6 mm²
|
3 Nm
|
0,8 Nm
|
6 mm²
|
0,8 Nm
|
35 mm²
|
6 mm²
|
4 mm²
|
4
|
6 mm²
|
25 mm²
|
6
|
Slotted / Phillips
|
12 mm
|
35 mm²
|
10 mm²
|
16 mm²
|
Slotted / Phillips
|
1,5 mm²
|
35 mm²
|
6 mm²
|
1,5 mm²
|
16 mm²
|
10 mm²
|
3 x 1
|
M 5
|
6 mm²
|
3 x 5
|
1,5 Nm
|
53 mm
|
74 mm
|
98 mm
|
50 mm
|
|
|
|
|
|
|
|
|
|
|
|
EEC
|
315,4 g
|
|
Select a variant in the list