PULS
Power supply 1-phase, Miniline Series 2
3 A model included in Pulse series Mini Line 2 is the latest development series of small power supplies with very compact dimensions and low weight. The units have high efficiency, low EMC interference and good protection against mains transients. This makes them useful in almost all electrical environments and are a great addition to the earlier Mini Line series.
Very low quiescent current and high efficiency even at loads down to 60% makes the aggregates at a good energy and environmental choices.
5 A model is included in the earlier series Miniline having a very proven design and spring terminals for the best connection.
Â
For good cooling free space of 40 mm above and 20 mm under the power supply is recommended. The sides 0 mm unless neighbouring products are a heat source, for example, a power supply unit. Leave then a 15 mm air gap
Â
Output characteristics | |
ML15.051 (3 A) | ML30.101 (5A) |
|
|
Â
- Output current 0.63 A to 4.5 A
- Up to 90.4% efficiency
- AC and DC input voltage
- Width from 22.5mm
- 5 V, 12 V and 24 V DC options
Selected variant
Technical data
Input data |
|
|---|---|
| Input voltage ac | 100-240 V |
| Input voltage ac min | 85 V AC |
| Input voltage ac max | 264 V AC |
| Input voltage dc | 110-300 V |
| Input voltage dc min | 88 V DC |
| Input voltage dc max | 375 V DC |
| Inrush current at 120 V ac typical | 13 A |
| Inrush current at 230 V ac typical | 26 A |
| Input voltage range | Wide-range |
| Power factor at 120 V ac, full load. Typical | 0,51 |
| Power factor at 230 V ac, full load. Typical | 0,44 |
| Number of phases | 1 |
Output data |
|
| Output voltage | 5 V DC |
| Output voltage min | 5 V DC |
| Output voltage max | 5,5 V DC |
| Output current | 3 A |
| Power | 15 W |
Efficiency / Lifetime / MTBF |
|
| Efficiency at 120 V ac, full load, typical | 76,8 % |
| Efficiency at 230 V ac, full load, typical | 77,2 % |
| Lifetime at 120 V ac, full load and +40 ° C | 70000 h |
| Lifetime at 230 V ac, full load and +40 ° C | 93000 h |
| MTBF (IEC 61709) 230 V ac, max load, 40 ° C | 2686000 h |
Dimensions |
|
| Width | 22,5 mm |
*Invisible Heading* |
|
|---|---|
| Height | 75 mm |
| Depth | 91 mm |
| Weight | 0,13 kg |
Other |
|
| Approvals | ABS, CB, CE, CSA, GL, NEC Class 2, UL |
| Hold time at 120 V ac, typical full load | 45 ms |
| Hold time at 230 V ac, typical full load | 186 ms |
| IP class | IP20 |
| Clamp type | Screw on |
| Load regulation | <100 mV (0-3 A) |
| Material protection | ABS plastic |
| Supply frequency | 50-60 ±6 % |
| Parallel connection for increased current | Yes. See manufacturers datasheet or contact OEM Automatic for more details. |
| Ripple max | 50 mV pp |
| Series | Miniline |
| Series connection for increased voltage | Yes. See manufacturers datasheet or contact OEM Automatic for more details. |
| Power consumption 120 V ac | 0,28 A |
| Power consumption 230 V ac | 0,17 A |
| Power drop from +60 °C to + 70 °C | 0,4 W/°C |
| Temperature min without derating | -10 °C |
| Temperature max without derating | 60 °C |
| Type Power Supply | AC-DC |
Measurements and connections
Product description
3 A model included in Pulse series Mini Line 2 is the latest development series of small power supplies with very compact dimensions and low weight. The units have high efficiency, low EMC interference and good protection against mains transients. This makes them useful in almost all electrical environments and are a great addition to the earlier Mini Line series.
Very low quiescent current and high efficiency even at loads down to 60% makes the aggregates at a good energy and environmental choices.
5 A model is included in the earlier series Miniline having a very proven design and spring terminals for the best connection.
Â
For good cooling free space of 40 mm above and 20 mm under the power supply is recommended. The sides 0 mm unless neighbouring products are a heat source, for example, a power supply unit. Leave then a 15 mm air gap
Â
Output characteristics | |
ML15.051 (3 A) | ML30.101 (5A) |
|
|
Â
Related
Recap of IATECH
Did you get a chance to visit IATECH at The Leicester Marriott Hotel? We had over 33 exhibitors and 8 fantastic Tech Talks throughout the day, Read all about the day, here.
Book your Cable Preparation Machinery Demo at OEM
To help experience the capabilities of Z+F machines first-hand, we provide an in-depth demonstration and workshop. These sessions will show the machines in action and allow you to understand their features and gain valuable insight into their operation and benefits.
OEM introduces IATECH - The Industrial Automation Technology Expo
We are thrilled to announce the launch of IATECH, THe Industrial Automation Technology expo at Leicester Marriott Hotel on 23rd October. The ultimate platform for showcasing our extensive product range and broad business areas, featuring over 50 leading suppliers under one roof!
Automation Components for Specialist Vehicles
The specialist vehicle industry can include automotive and EV, heavy vehicles such as agriculture and rail, and marine. This email takes you through some of the various products we offer for specialist vehicle applications.
Modern Power Distribution
This blog post delves into the key components, current trends, and best practices in power distribution, illustrating the significant impact these systems have on our daily operations and long-term energy strategies.
Lightning and surge protection to safeguard equipment
We shine a spotlight on surge protection devices (SPDs), a crucial yet often overlooked component in industrial settings. Every surge of electricity, every fluctuation in voltage, poses a potential threat to your machinery and systems.
