PULS
Power supply 2-phase, 24 V dc Dimension C Series
Puls Dimension C is an affordable range of very high quality, reliability and performance.
CT5 has integrated primary fuses that make it possible to connect the unit without the need for intermediate fuses up to 32 A (UL) which saves space and money.
The efficiency is high over a wide load range, which results in reduced power consumption and longer life regardless of load current. The average efficiency is 88.8% with a peak value of 90.4%.
The power supply can provide a higher short-circuit current for a short time, which helps to secondary fuses. Power boost of 20% enables higher current extraction without voltage drops. This is especially useful during start-ups and to bridge the current peaks in the application. The power reserve can be used continuously up to + 45°C and short periods from +45 to +60°C.
Active transient ensure operation also in very störrik electrical environment and moreover CT5 has active inrush current protection, which means a very low starting current, even if the unit has been in operation for a longer time. This is particularly useful for redundant / parallel system.
Power supply is connected to two phases, saving wiring and fuses. Thanks to the low power consumption, the effect of the imbalance in the three-phase system is negligible.
We recommend free space of 40 mm above and 20 mm below the unit and 5 mm on the sides.
- Output current of 5 A
- Up to 90.4% efficiency
- High reliability
- 20% power reserve
- Integrated primary fuses
Selected variant
Technical data
Input data |
|
|---|---|
| Input voltage ac | 380-480 V |
| Input voltage ac min | 323 V AC |
| Input voltage ac max | 576 V AC |
| Inrush current at 400 V ac typical | 4 A |
| Input voltage range | Wide-range |
| Power factor at 400 V ac, full load. Typical | 0,45 |
| Number of phases | 2 |
Output data |
|
| Output voltage | 24 V DC |
| Output voltage min | 24 V DC |
| Output voltage max | 28 V DC |
| Output current | 5 A |
| Power | 120 W |
Efficiency / Lifetime / MTBF |
|
| Efficiency at 400 V ac, typical | 88,8 % |
| Efficiency at 400 V ac, full load, typical | 90,4 % |
| Lifetime at 400 V ac, full load and +40 ° C | 92000 h |
| MTBF (IEC 61709) 400 V ac, max loan, +40 °C | 1173000 h |
Dimensions |
|
| Width | 40 mm |
| Height | 124 mm |
*Invisible Heading* |
|
|---|---|
| Depth | 117 mm |
| Weight | 0,5 kg |
Other |
|
| Approvals | ABS, CB, CE, CSA US, cRUus, cULus, GL |
| Hold time at 400 V ac, typical full load | 27 ms |
| IP class | IP20 |
| Clamp type | Screw |
| Material protection | Aluminium |
| Supply frequency | 50-60 ±6 % |
| Ripple max | 50 mV pp |
| Series | Dimension C |
| Power consumption at 400 V ac | 0,75 A |
| Power drop from +60 °C to + 70 °C | 3 W/°C |
| Temperature min without derating | -25 °C |
| Temperature max without derating | 60 °C |
| Type Power Supply | AC-DC |
| Active Transient | Yes |
Product description
Puls Dimension C is an affordable range of very high quality, reliability and performance.
CT5 has integrated primary fuses that make it possible to connect the unit without the need for intermediate fuses up to 32 A (UL) which saves space and money.
The efficiency is high over a wide load range, which results in reduced power consumption and longer life regardless of load current. The average efficiency is 88.8% with a peak value of 90.4%.
The power supply can provide a higher short-circuit current for a short time, which helps to secondary fuses. Power boost of 20% enables higher current extraction without voltage drops. This is especially useful during start-ups and to bridge the current peaks in the application. The power reserve can be used continuously up to + 45°C and short periods from +45 to +60°C.
Active transient ensure operation also in very störrik electrical environment and moreover CT5 has active inrush current protection, which means a very low starting current, even if the unit has been in operation for a longer time. This is particularly useful for redundant / parallel system.
Power supply is connected to two phases, saving wiring and fuses. Thanks to the low power consumption, the effect of the imbalance in the three-phase system is negligible.
We recommend free space of 40 mm above and 20 mm below the unit and 5 mm on the sides.
Related
Recap of IATECH
Did you get a chance to visit IATECH at The Leicester Marriott Hotel? We had over 33 exhibitors and 8 fantastic Tech Talks throughout the day, Read all about the day, here.
Book your Cable Preparation Machinery Demo at OEM
To help experience the capabilities of Z+F machines first-hand, we provide an in-depth demonstration and workshop. These sessions will show the machines in action and allow you to understand their features and gain valuable insight into their operation and benefits.
OEM introduces IATECH - The Industrial Automation Technology Expo
We are thrilled to announce the launch of IATECH, THe Industrial Automation Technology expo at Leicester Marriott Hotel on 23rd October. The ultimate platform for showcasing our extensive product range and broad business areas, featuring over 50 leading suppliers under one roof!
Automation Components for Specialist Vehicles
The specialist vehicle industry can include automotive and EV, heavy vehicles such as agriculture and rail, and marine. This email takes you through some of the various products we offer for specialist vehicle applications.
Modern Power Distribution
This blog post delves into the key components, current trends, and best practices in power distribution, illustrating the significant impact these systems have on our daily operations and long-term energy strategies.
Lightning and surge protection to safeguard equipment
We shine a spotlight on surge protection devices (SPDs), a crucial yet often overlooked component in industrial settings. Every surge of electricity, every fluctuation in voltage, poses a potential threat to your machinery and systems.
