Important notice - Our website is under going construction, therefore you may notice some issues. Please bare with us and contact or customer support team if you need any product information - 0116 284 9900
Important notice - Our website is under going construction, therefore you may notice some issues. Please bare with us and contact or customer support team if you need any product information - 0116 284 9900
PULS
The FPS300 is an industrialgrade power supply for 1-phase networks incorporated in to a rugged wall- mount housing with IP65/67 protection.
It provides two to four stabilized outputs that is galvanically separated from the input.
The negative potential of the outputs is permanently connected to PE within the unit.
The most outstanding features of the FPS series are the compact size, the wide operational temperature range, the extremely low input inrush current and the very high efficiencies, which are achieved by various design technologies.
Large sized output capacitors can absorb and store regenerative energy from breaking motors.
Input data |
|
|---|---|
| Input voltage ac | 100-240 V |
| Input voltage ac min | 85 V AC |
| Input voltage dc max | 360 V DC |
| Input voltage dc | 110-300 V |
| Input voltage ac max | 264 V AC |
| Number of phases | 1 |
| Inrush current at 230 V ac typical | 6 A |
| Inrush current at 120 V ac typical | 3 A |
| Power factor at 120 V ac, full load. Typical | 0,99 |
| Power factor at 230 V ac, full load. Typical | 0,97 |
| Input voltage dc min | 88 V DC |
Output data |
|
| Output voltage min | 24 V DC |
| Output current per channel | 10 A |
| Output voltage | 24 V DC |
| Output voltage max | 28 V DC |
| Power | 300 W |
Efficiency / Lifetime / MTBF |
|
| Efficiency at 230 V ac, full load, typical | 95,7 % |
| Efficiency at 230 V ac, typical | 94,6 % |
| Efficiency at 120 V ac, full load, typical | 94,3 % |
Dimensions |
|
| Weight | 1,2 kg |
| Depth | 59 mm |
| Width | 182 mm |
| Height | 183 mm |
Other |
|
|---|---|
| IP class | IP65, IP67 |
| Power consumption 120 V ac | 3,2 A |
| Ripple max | 50 mV pp |
| Temperature min without derating | -25 °C |
| Hold time at 120 V ac, typical full load | 37 ms |
| Series | FIEPOS eFuse |
| Hold time at 230 V ac, typical full load | 37 ms |
| Power consumption 230 V ac | 1,68 A |
| Supply frequency | 50-60 Hz ±6 % |
| Approvals | CB, CE, UKCA, cULus |
| Temperature max without derating | 55 °C |
| Material protection | Aluminium |
| Output connectors | 1x 7/8" |
| Total output power <+45°C | 360 W |
| Total output power <+55°C | 300 W |
| Total output power <+70°C | 150 W |
| Total output power <5 s, <+55°C | 600 W |
| Total output power <5 s, <+70°C | 300 W |
| Power drop from +55 °C to + 70 °C | 10 W/°C |
| Active Transient | Yes |
| Back-feeding loads | 35V / 4 J |
| DC relay output | No |
| DC-OK/IO-link connector | M12-A |
| Input connector | 7/8" |
| IO-LINK | Yes |
The FPS300 is an industrialgrade power supply for 1-phase networks incorporated in to a rugged wall- mount housing with IP65/67 protection.
It provides two to four stabilized outputs that is galvanically separated from the input.
The negative potential of the outputs is permanently connected to PE within the unit.
The most outstanding features of the FPS series are the compact size, the wide operational temperature range, the extremely low input inrush current and the very high efficiencies, which are achieved by various design technologies.
Large sized output capacitors can absorb and store regenerative energy from breaking motors.
Engineers and technicians are seeking solutions that streamline assembly whilst maintaining high levels of protection and flexibility. KDS-SR90 angled screw frames and inlays bring a new level of efficiency to cable routing with a unique 90° entry design.
The smallest logic controller by Crouzet is now 20% off for a limited time only! A powerhouse packed into just 17.5mm! Efficiency, adaptability, and seamless integration with free software.
Do you require signalling devices and beacons in your production process? Download our latest whitepaper!
Here, our customer requires control boxes for electricity metering systems. We leveraged our expertise to deliver easy-to-install, ready-to-use assemblies. We look forward to creating more of these bespoke control boxes for our customer.
This blog talks all things DC circuit protection including the key components: electronic circuit breakers, fuses and current monitoring devices. As well as how to choose the right protection.
Did you get a chance to visit IATECH at The Leicester Marriott Hotel? We had over 33 exhibitors and 8 fantastic Tech Talks throughout the day, Read all about the day, here.
