CONTA-CLIP

GSM-PRO2, GSM-PRO2E SIM Based SMS & Email Reporting Module

GSM-PRO2: the perfect communicator

 

CONTA-CLIP's GSM-PRO2 is an easy-to-use SMS reporting for remote monitoring of equipment that can signal changes of inputs and outputs through text messaging and email.

4G as standard to give full global coverage including the EU, USA & Australia.

 

The GSM-PRO2 module informs you when your process has achieved a user-defined status or limit value. Digital and analogue inputs values can also be sent via e-mail or SMS (text message). The digital relay outputs can be switched using an SMS sent from selected users allowing the system to be monitored and controlled remotely. Android and iPhone apps are available to make the monitoring and control functions of the GSM-PRO2 modules even easier to operate.

To further add to the flexibility, a new Web Portal CONTA-SUPERVISION is available and can work across all platforms.

 

The user-friendly browser-based programming software can be used to configure the module´s inputs and outputs and their required functions. 

  

Input and output

The GSM-PRO2 modules are equipped with two multi-function inputs, one relay output and a pulse counter input which can process a maximum of 1000 pulses per second, so that for example a photovoltaic system or a kWh meter can be connected. The compact unit can alos be configured as a Modbus Slave device.

The GSMPRO2E has ten multifunction inputs, 4 relay outputs and a pulse counter input

Both modules have built in hours run timers that can be assign to both inputs and outputs.

 

Expansion modules

All the GSM-PRO2 modules also provide the option for expanding the number of available inputs and outputs. Up to 15 I/O expansion modules, in 4 different versions, can be controlled for each module. The built-in plug connector supplies power and control functionality for the modules. The expansion modules can also be configured with the user-friendly browser-based application.

 

OTA (over-the-air) capabilities

In many systems or machines, some parameters or user entries may need to be changed after the installation is completed.

Whether you are adding a new phone number or email address of a new user, a new I/O setting,

a change in the module name or any other change: the settings on all GSM-PRO2 modules can easily be changed from remote locations around the world.

 

OTA firmware updates

The GSM-PRO2 can also update its firmware using OTA.

So modules with different versions can always be kept up to date.

 

Logging functionality

Is your process running optimally? What happened last week?

How many hours has the machine been running this week?

The extensive logging functionality of the GSM-PRO2 module

allows you to log events that have taken place at a facility or a machine over a defined period of time. The log files can be transferred to the PC using a USB cable. Or you can have the log files automatically sent to your e-mail address or displayed via a web-based portal.

 

Logs

● Event - logs all communication of the module

● Analogue - logs the process values ​​of the analogue inputs at selected time intervals

● Counter - Logs the time that an input or output is activated

 

Smartphone app

CONTA-CLIP's iPhone and Android smartphone apps for the GSM-PRO2 modules provide a simple and fast solution so that you can get an overview of each system and application. This app can show you the status of all inputs and outputs from one or more GSM-PRO2 modules. They also allow you a degree of control over the process. Module outputs can be controlled easily and directly using this app. The app´s buttons provide an intuitive control interface (for controlling a heater, motor, water pump, etc.).

 

 

 

 

Web IoT portal software CONTA-SUPERVISION

The GSM-PRO2, like most SMS modules, is often used as stand-alone units in the field. These modules are put to use at various remote locations even though they normally have configurations which are very similar. It is often quite helpful to have one overall view of the status of all modules used in the field. The new GSM-PRO2 web-based portal software from CONTA-CLIP offers you precisely this possibility. All modules in the field can now be easily monitored and run from a single local site or control panel.

 

The CONTA-SUPERVISION IoT portal can be opened in a web browser but is also available as an APP in the Google Play or Apple App store. Try the unlimited possibilities of the CONTA-SUPERVISION IoT portal for FREE . There will be a minimal annual cost in the future (around €99/year per Account), but two GSM-PRO2 modules can still use the CONTA-SUPERVISON IoT portal for FREE . An annual fee will be charged for more than two GSM-PRO2 modules.

Read more
  • 4G Modems with OTA capabilities
  • Two or Ten multifunction inputs and one count input as standard
  • One or four relay outputs as standard
  • Expandable IO
  • Android and IOS Smartphone app, Web based Portal
three variations of conta-Clips gsm-pro2 reporting modules, phone showing Conta-Clip app

See Link in Downloads to Register

Selected variant

Selected variant

Technical data

General Data

Number of inputs 2
Number of outputs 1
Supply voltage 10-30V dc
Current consumption 275 mA @ 24V dc
Mounting TS 35 and direct mount
GPS No
Electromagnetic compatibility EN55011, EN61326-1
Operating temperature from -20 °C
Operating temperature to 60 °C

Dimensions

Length 88 mm
Width 36 mm
Height 77 mm
Weight 149 g

Inputs

Input resistance U / I 80K / 500Ω
Input signal U / I max 30 V / -
Threshold digital inputs Low <3, High >6V
Minimum pulse duration 500 ms
Resolution I (0-20 mA) 40 µA / ± (40 µ + 0,3%)
Resolution U (0-10 V dc) 20mV / ±(20mV+0,3%)
Counter input (pull-down) 1000 pulses/s max. Pulldown res. 24 kOhm

Outputs

Relay contact 1 CO
Contact material AgNi 90/10
Switching capacity max 1200 VA

*Invisible Heading*

Rated V ac / switching V ac max 250 / 250 V ac
Continuous current max / Inrush current max 5 / 5 A
Mechanical life hours 15x10⁶
Electrical life in hours (AC1) 1,5x10⁵

Connections

Connection type Screw
Cross section single wire from 0,2 mm²
Cross section single wire to 4 mm²
Stripping length 6 mm
Torque 0,4 Nm
Number of ext. modules max 15

GSM/GPS Data

2G Quad-band GSM bands: 850, 900, 1800 and 1900 MHz
3G Five-band UMTS (WCDMA/FDD) bands: 800, 850, 900, 1800, 1900 and 2100 MHz
4G LTE CAT1: Penta band 700 (Bd28)/ 800 (Bd20)/900 (Bd8)/1800 (Bd3)/2100 MHz (Bd1)
SIM card Nano-SIM
Antenna GSM 50 Ohm, SMA-plug

Additional Data

DIN-VDE Spec LVD 2014/35/EC, EN 50178. EMC 2014/30/EC, EN 61326-1
IP class IP20
Relative humidity max 80 %
Pack size 1
Country of origin NL
Tariff code 85176990
Frequency spectrum ETSI EN 301-511 V9.0.2

Product description

GSM-PRO2: the perfect communicator

 

CONTA-CLIP's GSM-PRO2 is an easy-to-use SMS reporting for remote monitoring of equipment that can signal changes of inputs and outputs through text messaging and email.

4G as standard to give full global coverage including the EU, USA & Australia.

 

The GSM-PRO2 module informs you when your process has achieved a user-defined status or limit value. Digital and analogue inputs values can also be sent via e-mail or SMS (text message). The digital relay outputs can be switched using an SMS sent from selected users allowing the system to be monitored and controlled remotely. Android and iPhone apps are available to make the monitoring and control functions of the GSM-PRO2 modules even easier to operate.

To further add to the flexibility, a new Web Portal CONTA-SUPERVISION is available and can work across all platforms.

 

The user-friendly browser-based programming software can be used to configure the module´s inputs and outputs and their required functions. 

  

Input and output

The GSM-PRO2 modules are equipped with two multi-function inputs, one relay output and a pulse counter input which can process a maximum of 1000 pulses per second, so that for example a photovoltaic system or a kWh meter can be connected. The compact unit can alos be configured as a Modbus Slave device.

The GSMPRO2E has ten multifunction inputs, 4 relay outputs and a pulse counter input

Both modules have built in hours run timers that can be assign to both inputs and outputs.

 

Expansion modules

All the GSM-PRO2 modules also provide the option for expanding the number of available inputs and outputs. Up to 15 I/O expansion modules, in 4 different versions, can be controlled for each module. The built-in plug connector supplies power and control functionality for the modules. The expansion modules can also be configured with the user-friendly browser-based application.

 

OTA (over-the-air) capabilities

In many systems or machines, some parameters or user entries may need to be changed after the installation is completed.

Whether you are adding a new phone number or email address of a new user, a new I/O setting,

a change in the module name or any other change: the settings on all GSM-PRO2 modules can easily be changed from remote locations around the world.

 

OTA firmware updates

The GSM-PRO2 can also update its firmware using OTA.

So modules with different versions can always be kept up to date.

 

Logging functionality

Is your process running optimally? What happened last week?

How many hours has the machine been running this week?

The extensive logging functionality of the GSM-PRO2 module

allows you to log events that have taken place at a facility or a machine over a defined period of time. The log files can be transferred to the PC using a USB cable. Or you can have the log files automatically sent to your e-mail address or displayed via a web-based portal.

 

Logs

● Event - logs all communication of the module

● Analogue - logs the process values ​​of the analogue inputs at selected time intervals

● Counter - Logs the time that an input or output is activated

 

Smartphone app

CONTA-CLIP's iPhone and Android smartphone apps for the GSM-PRO2 modules provide a simple and fast solution so that you can get an overview of each system and application. This app can show you the status of all inputs and outputs from one or more GSM-PRO2 modules. They also allow you a degree of control over the process. Module outputs can be controlled easily and directly using this app. The app´s buttons provide an intuitive control interface (for controlling a heater, motor, water pump, etc.).

 

 

 

 

Web IoT portal software CONTA-SUPERVISION

The GSM-PRO2, like most SMS modules, is often used as stand-alone units in the field. These modules are put to use at various remote locations even though they normally have configurations which are very similar. It is often quite helpful to have one overall view of the status of all modules used in the field. The new GSM-PRO2 web-based portal software from CONTA-CLIP offers you precisely this possibility. All modules in the field can now be easily monitored and run from a single local site or control panel.

 

The CONTA-SUPERVISION IoT portal can be opened in a web browser but is also available as an APP in the Google Play or Apple App store. Try the unlimited possibilities of the CONTA-SUPERVISION IoT portal for FREE . There will be a minimal annual cost in the future (around €99/year per Account), but two GSM-PRO2 modules can still use the CONTA-SUPERVISON IoT portal for FREE . An annual fee will be charged for more than two GSM-PRO2 modules.

Accessories

Parts Number of inputs Number of outputs Supply voltage Current consumption LED status GPS Extension module Approvals Electromagnetic compatibility Operating temperature from Operating temperature to Length Width Height Weight Input Input frequency max Input resistance U / I Input resistance RTD Input signal U / I max Threshold digital inputs Minimum pulse duration Logic "0" Resolution I (0-20 mA) Resolution U (0-10 V dc) Control pulse length min Counter input (pull-down) Load resistance U Resolution RTD Temperature coefficient Output Relay contact Contact configuration Contact material Switching capacity max Switching current max Rated V ac / switching V ac max Continuous current max / Inrush current max Mechanical life hours Electrical life in hours (AC1) Module current (all relays) max Connection type Number of ext. modules max 2G 3G 4G SIM card Antenna GSM Frequency GPS Time to first fix (@ -140dBm) Antenna GPS Voltage active antenna DIN-VDE Spec IP class Relative humidity max Frequency spectrum Cross section stranded wire to Cross section stranded wire from Storage temperature min Cross section stranded with ferrule from Storage temperature max Cross section stranded with ferrule to Price
2
1
10-30V dc
275 mA @ 24V dc
No
EN55011, EN61326-1
-20 °C
60 °C
88 mm
36 mm
77 mm
149 g
80K / 500Ω
30 V / -
Low <3, High >6V
500 ms
40 µA / ± (40 µ + 0,3%)
20mV / ±(20mV+0,3%)
1000 pulses/s max. Pulldown res. 24 kOhm
1 CO
AgNi 90/10
1200 VA
250 / 250 V ac
5 / 5 A
15x10⁶
1,5x10⁵
Screw
15
Quad-band GSM bands: 850, 900, 1800 and 1900 MHz
Five-band UMTS (WCDMA/FDD) bands: 800, 850, 900, 1800, 1900 and 2100 MHz
LTE CAT1: Penta band 700 (Bd28)/ 800 (Bd20)/900 (Bd8)/1800 (Bd3)/2100 MHz (Bd1)
Nano-SIM
50 Ohm, SMA-plug
LVD 2014/35/EC, EN 50178. EMC 2014/30/EC, EN 61326-1
IP20
80 %
ETSI EN 301-511 V9.0.2
10
4
10-30V dc
275 mA @ 24V dc
No
EN55011, EN61326-1
-20 °C
60 °C
88 mm
95 mm
77 mm
262 g
80K / 500Ω
30 V / -
Low <3, High >6V
500 ms
40 µA / ± (40 µ + 0,3%)
20mV / ±(20mV+0,3%)
1000 pulses/s max. Pulldown res. 24 kOhm
1 CO
AgNi 90/10
1200 VA
250 / 250 V ac
5 / 5 A
15x10⁶
1,5x10⁵
Screw
15
Quad-band GSM bands: 850, 900, 1800 and 1900 MHz
Five-band UMTS (WCDMA/FDD) bands: 800, 850, 900, 1800, 1900 and 2100 MHz
LTE CAT1: Penta band 700 (Bd28)/ 800 (Bd20)/900 (Bd8)/1800 (Bd3)/2100 MHz (Bd1)
Nano-SIM
50 Ohm, SMA-plug
LVD 2014/35/EC, EN 50178. EMC 2014/30/EC, EN 61326-1
IP20
80 %
ETSI EN 301-511 V9.0.2
2
1
10-30V dc
275 mA @ 24V dc
No
EN55011, EN61326-1
-20 °C
60 °C
88 mm
36 mm
77 mm
149 g
80K / 500Ω
30 V / -
Low <3, High >6V
500 ms
40 µA / ± (40 µ + 0,3%)
20mV / ±(20mV+0,3%)
1000 pulses/s max. Pulldown res. 24 kOhm
1 CO
AgNi 90/10
1200 VA
250 / 250 V ac
5 / 5 A
15x10⁶
1,5x10⁵
Screw
15
Quad-band GSM bands: 850, 900, 1800 and 1900 MHz
Five-band UMTS (WCDMA/FDD) bands: 800, 850, 900, 1800, 1900 and 2100 MHz
LTE CAT1: Quad band, 700 (Bd12)/ 850 (Bd5)/AWS (Bd4)/1900 MHz (Bd2)
Nano-SIM
50 Ohm, SMA-plug
LVD 2014/35/EC, EN 50178. EMC 2014/30/EC, EN 61326-1
IP20
80 %
ETSI EN 301-511 V9.0.2
10
4
10-30V dc
275 mA @ 24V dc
No
EN55011, EN61326-1
-20 °C
60 °C
88 mm
95 mm
77 mm
262 g
80K / 500Ω
30 V / -
Low <3, High >6V
500 ms
40 µA / ± (40 µ + 0,3%)
20mV / ±(20mV+0,3%)
1000 pulses/s max. Pulldown res. 24 kOhm
1 CO
AgNi 90/10
1200 VA
250 / 250 V ac
5 / 5 A
15x10⁶
1,5x10⁵
Screw
15
Quad-band GSM bands: 850, 900, 1800 and 1900 MHz
Five-band UMTS (WCDMA/FDD) bands: 800, 850, 900, 1800, 1900 and 2100 MHz
LTE CAT1: Quad band, 700 (Bd12)/ 850 (Bd5)/AWS (Bd4)/1900 MHz (Bd2)
Nano-SIM
50 Ohm, SMA-plug
LVD 2014/35/EC, EN 50178. EMC 2014/30/EC, EN 61326-1
IP20
80 %
ETSI EN 301-511 V9.0.2
10
20-28V dc
30 mA
Yes
No
Yes
CE
-20 °C
60 °C
53 mm
95 mm
60 mm
154 g
Digital
20 Hz
58K
30V dc / -
<3 V
15 ms
Screw
LVD 2014/35/EC, EN 50178. EMC 2014/30/EC, EN 61326-1
IP20
90 %
8
20-28V dc
50 mA
No
Yes
CE
-20 °C
60 °C
53 mm
95 mm
60 mm
128 g
Analog
200K / 250Ω
Plug-in, default 5k11 for Ni/PT1000 RTD sensors
10V dc / 20 mA
10 bit / ± (20 µA + 0,4% of measured value)
10bit / ± (10mV + 0,3% of measured value)
14 bit / ± (0,4 °C + 0,5% of measured value)
<0,02% / K
Screw
LVD 2014/35/EC, EN 50178. EMC 2014/30/EC, EN 61326-1
IP20
90 %
4
20-28V dc
100 mA
Yes
No
Yes
CE
-20 °C
60 °C
53 mm
95 mm
60 mm
172 g
Digital
1 CO
AgSnO2
4000 VA
16 / 80 (20 ms)
250 / 250 V ac
30x10⁵
1x10⁵
32 A
Screw
LVD 2014/35/EC, EN 50178. EMC 2014/30/EC, EN 61326-1
IP20
90 %
4
12 V dc
100 mA
Yes
No
Yes
CE
-20 °C
60 °C
53 mm
95 mm
60 mm
172 g
Digital
1 CO
AgSnO2
4000 VA
16 / 80 (20 ms)
250 / 250 V ac
30x10⁵
1x10⁵
32 A
Screw
LVD 2014/35/EC, EN 50178. EMC 2014/30/EC, EN 61326-1
IP20
90 %
4
20-28V dc
57 mA
No
No
Yes
CE
-20 °C
60 °C
36 mm
95 mm
60 mm
66 g
10bit / ± (30mV + 0,5% of measured value)
>1000 Ω
<0,02% / K
Analog
Screw
LVD 2014/35/EC, EN 50178. EMC 2014/30/EC, EN 61326-1
IP20
90 %
20-28 V dc
Yes
36 mm
95 mm
60 mm
105 g
90 %
4 mm²
0,2 mm²
-20 °C
0,2 mm²
70 °C
2,5 mm²
2
1
10-30V dc
275 mA @ 24V dc
No
EN55011, EN61326-1
-20 °C
60 °C
88 mm
36 mm
77 mm
135 g
80K / 500Ω
30 V / -
Low <3, High >6V
500 ms
40 µA / ± (40 µ + 0,3%)
20mV / ±(20mV+0,3%)
1000 pulses/s max. Pulldown res. 24 kOhm
1 CO
AgNi 90/10
1200 VA
250 / 250 V ac
5 / 5 A
15x10⁶
1,5x10⁵
Screw
15
Quad-band GSM bands: 850, 900, 1800 and 1900 MHz
Five-band UMTS (WCDMA/FDD) bands: 800, 850, 900, 1800, 1900 and 2100 MHz
Nano-SIM
50 Ohm, SMA-plug
LVD 2014/35/EC, EN 50178. EMC 2014/30/EC, EN 61326-1
IP20
80 %
ETSI EN 301-511 V9.0.2
10
4
10-30V dc
275 mA @ 24V dc
No
EN55011, EN61326-1
-20 °C
60 °C
88 mm
95 mm
77 mm
230 g
80K / 500Ω
30 V / -
Low <3, High >6V
500 ms
40 µA / ± (40 µ + 0,3%)
20mV / ±(20mV+0,3%)
1000 pulses/s max. Pulldown res. 24 kOhm
1 CO
AgNi 90/10
1200 VA
250 / 250 V ac
5 / 5 A
15x10⁶
1,5x10⁵
Screw
15
Quad-band GSM bands: 850, 900, 1800 and 1900 MHz
Five-band UMTS (WCDMA/FDD) bands: 800, 850, 900, 1800, 1900 and 2100 MHz
Nano-SIM
50 Ohm, SMA-plug
LVD 2014/35/EC, EN 50178. EMC 2014/30/EC, EN 61326-1
IP20
80 %
ETSI EN 301-511 V9.0.2
2
1
10-30V dc
275 mA @ 24V dc
Yes
EN55011, EN61326-1
-20 °C
60 °C
88 mm
36 mm
77 mm
137 g
80K / 500Ω
30 V / -
Low <3, High >6V
500 ms
40 µA / ± (40 µ + 0,3%)
20mV / ±(20mV+0,3%)
1000 pulses/s max. Pulldown res. 24 kOhm
1 CO
AgNi 90/10
1200 VA
250 / 250 V ac
5 / 5 A
15x10⁶
1,5x10⁵
Screw
15
Quad-band GSM bands: 850, 900, 1800 and 1900 MHz
Five-band UMTS (WCDMA/FDD) bands: 800, 850, 900, 1800, 1900 and 2100 MHz
Nano-SIM
50 Ohm, SMA-plug
1575-1587 Mhz
Hot<2s, warm<35s, cold<46s
50 Ohm, SMA-plug
3 V @ RF plug
LVD 2014/35/EC, EN 50178. EMC 2014/30/EC, EN 61326-1
IP20
80 %
ETSI EN 301-511 V9.0.2
10
4
10-30V dc
275 mA @ 24V dc
Yes
EN55011, EN61326-1
-20 °C
60 °C
88 mm
95 mm
77 mm
232 g
80K / 500Ω
30 V / -
Low <3, High >6V
500 ms
40 µA / ± (40 µ + 0,3%)
20mV / ±(20mV+0,3%)
1000 pulses/s max. Pulldown res. 24 kOhm
1 CO
AgNi 90/10
1200 VA
250 / 250 V ac
5 / 5 A
15x10⁶
1,5x10⁵
Screw
15
Quad-band GSM bands: 850, 900, 1800 and 1900 MHz
Five-band UMTS (WCDMA/FDD) bands: 800, 850, 900, 1800, 1900 and 2100 MHz
Nano-SIM
50 Ohm, SMA-plug
1575-1587 Mhz
Hot<2s, warm<35s, cold<46s
50 Ohm, SMA-plug
3 V @ RF plug
LVD 2014/35/EC, EN 50178. EMC 2014/30/EC, EN 61326-1
IP20
80 %
ETSI EN 301-511 V9.0.2

Selected variant

Select a variant in the list

Contact us

If you need any help, you can contact us in one of the following ways:

phone 0116 284 9900

Send an e-mail Send an e-mail

comments Use live chat

Logo

Cookie settings for OEM.CO.UK

Cookies help us improve your experience with us, so in order to be able to handle login information, offer you personalised content and for basic functionality of this website, we use some cookies.

We will never sell on any information about you. 

You can accept all cookies or personalise your cookies preferences, you can also change your cookie preferences at any time by visiting our contact page.

Necessary Cookies

These cookies are necessary for the website to work and can not be turned off in our systems. They are usually used only in response to actions you have taken in connection with a service request, for example when setting personal preferences, logging in or filling out a form.

Analysis and measurement cookies

These cookies allow us to count the number of visits and traffic sources so that we can measure and improve our website performance. They help us know which pages are more or less popular and how visitors navigate around the site. The information that these cookies collect is aggregated and therefore completely anonymous. If you do not allow these cookies, we do not know when you have visited our website.

Marketing cookies

These cookies can be added by our partners. They can use them to create a profile of you, based on your interests, to show you more relevant information. They do not store any personal information - only information about your browser and device. If you do not accept these cookies, you will have a more general and less customized user experience.