LUMEL
Lumel RP3 three phase power controller
The RP3 power controller is a contactless three-phase power energy electronic device which includes a thyristor connector and an electronic gate triggering system. (GTS)
This power controller allows the control of the power delivered from a three-phase voltage source to an electrical energy load in function of the control signal input. The RP3 power controller is destined for three-phase actuators with resistance or resistance-inductance loads in control systems and automatic temperature control.
The application area of RP3 power controllers comprises:
• electrical furnaces and drying constructions, particularly industrial tunnels and belt- type furnaces, furnaces for annealing and hard soldering, crucible furnaces and smelters, furnaces for hardening in salt baths
• devices of mechanical engineering, aggregates and extruding presses for plastics, devices, for winding and tempering of springs, spot welding and seam welders
• production of glass and glazing, installations and devices for drying in infrared and ultraviolet radiation, ladles for glass melt and heating of feeding devices, furnaces for glass forming• chemical and petroleum industries, facing heaters of tube installations, preheating installations
KINDS OF CONTROL
• On-off control
• Chopper control:
o fast cycle - fi,max » 1 Hz
o slow cycle - fi,max » 0.1 Hz
o Phase control
ADDITIONAL FUNCTIONS
• Load current limitation
• Delay of soft start tripping type
• Control of the initial gating angle value
• Control of the input line amplification
• Supervising and signalling of the current in the load circuit, output U= f(lo)
• Supervising of the radiator temperature
• Signalling of the fuse damage
• Signalling of the incorrect phase sequence
• Signalling of overload
• Relay outputs
Â
- Contactless power switching on
- Output current up to 450 A
- Alarming relay outputs
- Control by an impulse, analogue or potentiometer signal
Selected variant
Technical data
| Dimensions | 212 x 318 x 177 mm |
|---|---|
| Output | Maximum output current 125A |
| Temperature operational max | 40 °C |
| Temperature operational min | 0 °C |
| Weight | 8,5 kg |
Downloads
Product description
The RP3 power controller is a contactless three-phase power energy electronic device which includes a thyristor connector and an electronic gate triggering system. (GTS)
This power controller allows the control of the power delivered from a three-phase voltage source to an electrical energy load in function of the control signal input. The RP3 power controller is destined for three-phase actuators with resistance or resistance-inductance loads in control systems and automatic temperature control.
The application area of RP3 power controllers comprises:
• electrical furnaces and drying constructions, particularly industrial tunnels and belt- type furnaces, furnaces for annealing and hard soldering, crucible furnaces and smelters, furnaces for hardening in salt baths
• devices of mechanical engineering, aggregates and extruding presses for plastics, devices, for winding and tempering of springs, spot welding and seam welders
• production of glass and glazing, installations and devices for drying in infrared and ultraviolet radiation, ladles for glass melt and heating of feeding devices, furnaces for glass forming• chemical and petroleum industries, facing heaters of tube installations, preheating installations
KINDS OF CONTROL
• On-off control
• Chopper control:
o fast cycle - fi,max » 1 Hz
o slow cycle - fi,max » 0.1 Hz
o Phase control
ADDITIONAL FUNCTIONS
• Load current limitation
• Delay of soft start tripping type
• Control of the initial gating angle value
• Control of the input line amplification
• Supervising and signalling of the current in the load circuit, output U= f(lo)
• Supervising of the radiator temperature
• Signalling of the fuse damage
• Signalling of the incorrect phase sequence
• Signalling of overload
• Relay outputs
Â
Related
The smallest logic controller ever on limited time discount
The smallest logic controller by Crouzet is now 20% off for a limited time only! A powerhouse packed into just 17.5mm! Efficiency, adaptability, and seamless integration with free software.
11 questions to get the right signalling device – a whitepaper
Do you require signalling devices and beacons in your production process? Download our latest whitepaper!
Control Box Assembly for Industrial Electricity Metering - A case study
Here, our customer requires control boxes for electricity metering systems. We leveraged our expertise to deliver easy-to-install, ready-to-use assemblies. We look forward to creating more of these bespoke control boxes for our customer.
Safeguard systems with DC circuit protection
This blog talks all things DC circuit protection including the key components: electronic circuit breakers, fuses and current monitoring devices. As well as how to choose the right protection.
Recap of IATECH
Did you get a chance to visit IATECH at The Leicester Marriott Hotel? We had over 33 exhibitors and 8 fantastic Tech Talks throughout the day, Read all about the day, here.
Book your Cable Preparation Machinery Demo at OEM
To help experience the capabilities of Z+F machines first-hand, we provide an in-depth demonstration and workshop. These sessions will show the machines in action and allow you to understand their features and gain valuable insight into their operation and benefits.
