SENSECA
Honsberg - UR1 Series Flow Switch
Paddle
The Honsberg UR1 is a simple flow switch which can easily be adjusted and also changed from normally open to normally closed. The flow switch works via a spring-supported paddle which moves according to the flow and when the specific flow is reach a magnetic reed switch is activated.
Special versions
• Plastic materials
• Weld/solder connection
• High volume OEM version
• Ex
• Switching ranges for oil or gas
• Special values
• High volume OEM version
• PVC (solder fitting)
- Switching range 1,3..35 l/min
- Water (oils, gases and aggressive media available on request)
- G⅜" up to G2"
- Brass or stainless steel wetted parts
- Max pressure 25 bar
Selected variant
Technical data
| Accuracy | ±15% fs |
|---|---|
| Adjustable switching point l/min water | 2,5..3,5 l/min |
| Connection type | G3/8" female |
| Contact rating max | 50 A |
| Contact rating max | 50 VA |
| Electrical connection | 1.5m cable |
| Flow max | 10 l/min |
| Function | Normally open or normally closed (SPST) |
| IP class | IP65 |
| Material breaker body | Hard ferrite |
| Material of body | Nickel-plated brass, Stainless steel 303 |
| Material of connection | Nickel-plated brass |
| Material of seals | NBR |
| Material of wetted parts | Nickel-plated brass, Stainless steel, Hard ferrite, NBR |
|---|---|
| Material paddle | Stainless steel 301 |
| Media | Water (oil, air and aggressive media on request) |
| Pressure drop | Approx. 0.01 bar at max. flow |
| Pressure range max | 25 bar |
| Temperature of media from | 20 °C |
| Temperature of media to | 110 °C |
| Type of flow component | Flow Switches |
| Weight | 0,35 kg |
| Viscosity | 1 cSt |
| Voltage ac max | 230 V |
Product description
The Honsberg UR1 is a simple flow switch which can easily be adjusted and also changed from normally open to normally closed. The flow switch works via a spring-supported paddle which moves according to the flow and when the specific flow is reach a magnetic reed switch is activated.
Special versions
• Plastic materials
• Weld/solder connection
• High volume OEM version
• Ex
• Switching ranges for oil or gas
• Special values
• High volume OEM version
• PVC (solder fitting)
Ordering information
Ordering information
● Specify direction of flow, medium, and switching range, UR1 or switching value UR2.
● For UR2 specify normally closed (n.c.) or normally open (n.o.).
● For oils, state viscosity, temperature and designation (e.g. ISO VG 68) (enquire about range).
● For gases, state pressure (relative or absolute), temperature and medium (e.g. air) (enquire about range).
Installation
- Include straight calming section of 5 x DN in inlet and outlet.
- Include a filter if the media is dirty (use magnetic filter for ferritic components).
- It must be ensured that the values given for voltage, current and power are not exceeded.
- When switched on, a load must be connected in series.
- The electrical details apply to ohmic loads. Capacitive, inductive and lamp loads must be operated using a protective circuit.
- Standard: horizontal inwards flow; switching head not recommended underneath; other installation positions are possible; the installation position affects the switching point and range.
Related
Recap of IATECH
Did you get a chance to visit IATECH at The Leicester Marriott Hotel? We had over 33 exhibitors and 8 fantastic Tech Talks throughout the day, Read all about the day, here.
Our Valve Actuation Service
Did you know that OEM Automatic has been successfully providing valve actuation solutions?
OEM introduces IATECH - The Industrial Automation Technology Expo
We are thrilled to announce the launch of IATECH, THe Industrial Automation Technology expo at Leicester Marriott Hotel on 23rd October. The ultimate platform for showcasing our extensive product range and broad business areas, featuring over 50 leading suppliers under one roof!
Automation Components for Specialist Vehicles
The specialist vehicle industry can include automotive and EV, heavy vehicles such as agriculture and rail, and marine. This email takes you through some of the various products we offer for specialist vehicle applications.
Case Study - Electro Pneumatic Control Box
At OEM Automatic, we can supply a series of components for your one project. All under one roof. This case study discusses how we supplied several components for our customer's new electro-pneumatic control box.
New Hydrogen Approved Pressure Switches
OEM is pleased to announce a range of hydrogen-approved mechanical pressure switches, by Suco! Today, hydrogen plays a key role in climate-neutral energy generation and storage.
