APLISENS
Aplisens - SGE-25 Smart Level Sensor
Hydrostatic
The SGE-25 hydrostatic level probe measures liquid levels in tanks, deep wells or piezometers. Â Its specialised design means it can measure water levels in very narrow conditions.
Â
Its operation is based on a simple relationship between the height of the liquid column and the resulting hydrostatic pressure. Â Applications include pumping stations, fermentation chambers, settling tanks, borehole levels and ponds.
Â
When the probe is lowered to the reference level it can either hang freely or lie on the bottom. Â If there is a possibility of turbulence in the tank (for example mixer operation or a turbulent inflow) then the probe should be installed inside a screening tube (e.g. made of PVC). Â Cleaning the probe diaphragm by mechanical means is strictly prohibited. Â The SGE-25 uses HART protocol and can be configured using the following metrological parameters:
Â
- Units of pressure
- Start and end-points of the set range
- Damping time constant
- Invert the output signal (.i.e. 20-4mA)
Â
Â
Through the data interchange with the probe you can also:
Â
- Identify the probe
- Read the hydrostatic pressure value, output current and percentage of measuring range
Â
Options include Exia, thread on cable entry, titanium wetted parts, DNV approval, cable options and higher temperature rating.
Â
- 1..100mH2O
- 4-20mA & HART protocol
- ATEX option
- Marine certification (DNV) option
Selected variant
Technical data
| Cable length | 5 m |
|---|---|
| Deviation max | 0,1 % |
| IP class | IP68 |
| Material cable | PUR |
| Material of body | Stainless steel 316L |
| Material of wetted parts | Hastelloy C, Stainless Steel SIS2350 (316L) |
| Pressure range max | 1 mH2O |
| Pressure range min | 0 mH2O |
|---|---|
| Signal type | 4-20 mA / Hart |
| Supply voltage dc max | 55 V DC |
| Supply voltage dc min | 7,5 V DC |
| Temperature of media from | -30 °C |
| Temperature of media to | 40 °C |
Product description
The SGE-25 hydrostatic level probe measures liquid levels in tanks, deep wells or piezometers. Â Its specialised design means it can measure water levels in very narrow conditions.
Â
Its operation is based on a simple relationship between the height of the liquid column and the resulting hydrostatic pressure. Â Applications include pumping stations, fermentation chambers, settling tanks, borehole levels and ponds.
Â
When the probe is lowered to the reference level it can either hang freely or lie on the bottom. Â If there is a possibility of turbulence in the tank (for example mixer operation or a turbulent inflow) then the probe should be installed inside a screening tube (e.g. made of PVC). Â Cleaning the probe diaphragm by mechanical means is strictly prohibited. Â The SGE-25 uses HART protocol and can be configured using the following metrological parameters:
Â
- Units of pressure
- Start and end-points of the set range
- Damping time constant
- Invert the output signal (.i.e. 20-4mA)
Â
Â
Through the data interchange with the probe you can also:
Â
- Identify the probe
- Read the hydrostatic pressure value, output current and percentage of measuring range
Â
Options include Exia, thread on cable entry, titanium wetted parts, DNV approval, cable options and higher temperature rating.
Â
Related
Recap of IATECH
Did you get a chance to visit IATECH at The Leicester Marriott Hotel? We had over 33 exhibitors and 8 fantastic Tech Talks throughout the day, Read all about the day, here.
Our Valve Actuation Service
Did you know that OEM Automatic has been successfully providing valve actuation solutions?
OEM introduces IATECH - The Industrial Automation Technology Expo
We are thrilled to announce the launch of IATECH, THe Industrial Automation Technology expo at Leicester Marriott Hotel on 23rd October. The ultimate platform for showcasing our extensive product range and broad business areas, featuring over 50 leading suppliers under one roof!
Automation Components for Specialist Vehicles
The specialist vehicle industry can include automotive and EV, heavy vehicles such as agriculture and rail, and marine. This email takes you through some of the various products we offer for specialist vehicle applications.
Case Study - Electro Pneumatic Control Box
At OEM Automatic, we can supply a series of components for your one project. All under one roof. This case study discusses how we supplied several components for our customer's new electro-pneumatic control box.Â
New Hydrogen Approved Pressure Switches
OEM is pleased to announce a range of hydrogen-approved mechanical pressure switches, by Suco! Today, hydrogen plays a key role in climate-neutral energy generation and storage.
