DATASENSING
Datasensing - Safety Laser Scanner
Laser Sentinel Enhanced
Dynamic and Static Environments
The SLS enhanced can be mounted onto vehicles, such as automated guided vehicles (AGVs), safety and warning zones can be programmed to automatically change the position, speed and direction of the vehicle when something enters the safety or warning zones. Additionally, SLS-M5-E-1708-E is provided with encoder inputs to allow safe measuring of the speed of the vehicle.
The same configurations can also be applied to static units, used for when the working condition of a machine changes throughout the shift. You can also programme the scanner to mute areas of varying size and position, this is achieved my muting sensors that would be activated by the machine or load that will be entering or exiting the unsafe area. This allows for moving equipment in the area to still operate with certain allowable interventions.
Setting up
The Safety Laser Scanner Enhanced is easy to set up, the units configuration is via the bundled software which will quickly guide you through the set up process. Featuring standard connectors for all cabling to and from the unit and various mounting brackets available to suit any placements options. The units configuration is stored within the Memory Group Module, meaning you can easily swap the main unit out without needing to set up the system again, causing minimal downtime.
With a single cable, up to 4 Safety Laser Sentinel units can be connected in a Master/Slave configuration, through an Ethernet-based safe communication bus. This can provide a wider, more robust protection scheme without the need for individual set up or external controls units, saving time and money, due to the reduced time needed wiring and configuring software, as all 4 units work seamlessly and synchronised.
- I/O connection
- More than 72m² safely monitored
- Up to 70 zone sets
- up to 3 simultaneous safety zones
Selected variant
Technical data
| Angular resolution | 0,1 ° |
|---|---|
| Connector | M12 8 pin or M12 12 pin |
| Humidity | 15 … 95% (no condensation) |
| IP class | IP65 |
| Laser class | Class 1 |
| Material of body | Aluminium, Polycarbonate |
| MTTFd | 61 year(s) |
| Opening angle | 275 ° |
| Output current | 0.25 A max / each OSSD |
| PL | D (EN ISO 13849-1) |
| Safety zone operating range | 3 m |
| SIL | 2 (IEC 61508) |
|---|---|
| Storage temperature max | 70 °C |
| Storage temperature min | -20 °C |
| Supply voltage | 24 Vdc ±20% |
| Temperature operational max | 50 °C |
| Temperature operational min | -10 °C |
| Type | Master |
| Warning zone max operating range | 40 m |
| Weight | 1500 g |
Product description
Dynamic and Static Environments
The SLS enhanced can be mounted onto vehicles, such as automated guided vehicles (AGVs), safety and warning zones can be programmed to automatically change the position, speed and direction of the vehicle when something enters the safety or warning zones. Additionally, SLS-M5-E-1708-E is provided with encoder inputs to allow safe measuring of the speed of the vehicle.
The same configurations can also be applied to static units, used for when the working condition of a machine changes throughout the shift. You can also programme the scanner to mute areas of varying size and position, this is achieved my muting sensors that would be activated by the machine or load that will be entering or exiting the unsafe area. This allows for moving equipment in the area to still operate with certain allowable interventions.
Setting up
The Safety Laser Scanner Enhanced is easy to set up, the units configuration is via the bundled software which will quickly guide you through the set up process. Featuring standard connectors for all cabling to and from the unit and various mounting brackets available to suit any placements options. The units configuration is stored within the Memory Group Module, meaning you can easily swap the main unit out without needing to set up the system again, causing minimal downtime.
With a single cable, up to 4 Safety Laser Sentinel units can be connected in a Master/Slave configuration, through an Ethernet-based safe communication bus. This can provide a wider, more robust protection scheme without the need for individual set up or external controls units, saving time and money, due to the reduced time needed wiring and configuring software, as all 4 units work seamlessly and synchronised.
Related
Recap of IATECH
Did you get a chance to visit IATECH at The Leicester Marriott Hotel? We had over 33 exhibitors and 8 fantastic Tech Talks throughout the day, Read all about the day, here.
OEM introduces IATECH - The Industrial Automation Technology Expo
We are thrilled to announce the launch of IATECH, THe Industrial Automation Technology expo at Leicester Marriott Hotel on 23rd October. The ultimate platform for showcasing our extensive product range and broad business areas, featuring over 50 leading suppliers under one roof!
Automation Components for Specialist Vehicles
The specialist vehicle industry can include automotive and EV, heavy vehicles such as agriculture and rail, and marine. This email takes you through some of the various products we offer for specialist vehicle applications.
High speed mark detection with miniature contrast sensors
If you're looking for more speed and accuracy, this new contrast sensor will work for you.
About safety mats, bumpers and door curtains
Do you need help with the safety of your industrial doors, gates, or high-speed doors? Whether you require safety edges, light curtains, safety bumpers, or complete control systems, we can help.
Barcode verification in Intralogistics, Warehouses and Food & Beverage
If you are a machine builder or system integrator within the manufacturing, intralogistics or food and bev industry. Take a look at our article on barcode verification.
